Miller & Kreisel LCR750

Miller & Kreisel LCR750

£595.00Price

The NEW Miller & Kreisel 750 Series takes the THX Select category to new a level and we are proud to introduce a true acoustic upgrade, in the form of our own customized Danish designed and produced tweeters.

We’ve taken the innovative high-performance technologies from the S150 Series and integrated them into the NEW Miller & Kreisel 750 Series.

New Danish-designed high-performance tweeters

28 mm vented voice coils provide high power handling and extended linearity.

28 mm high-precision coated soft dome.

Specially constructed resonance-damped tweeter magnet-system for precise transient control.

Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response.

High frequency prism system – Curved metal grill and angle tweeter for optimized off-axis response as well as on-axis response.

New 5.25-inch woofers

Aluminum distortion-killer rings for reduced distortion at high SPL levels.

New extra-stiff coated fiberglass cone with special M&K profile geometry.

Vented pole piece in magnet system for low compression performance.

Vented voice coil for low compression.

New optimized crossovers

Phase-focused crossover designs optimized for low crossover points and transient control.

New proprietary M&K Sound interconnect cables.

Specifications for the LCR750 Speaker

Sound

Nominal system impedance

4 ohm (Z-min 3.4 ohm)

Frequency Response:

80-20Khz (average response in room +/- 3dB)

Frequency roll off:

80 Hz (-6dB at 80 Hz near field)

Crossover Frequency:

1.6 Khz (“Phase focused” 4th/2nd oder)

Tweeter:

1,1″ Silk Coated Dome

Woofer:

2 x 5.25″ Coated Glass Fibre

Power handling:

150 watt (Long term IEC-268-5 (cycled input 80-20Khz)

Power handling:

80 watt (Rated IEC-268-5 (constant input 80-20Khz)

Recommended Amplifier Power:

25-400 watt (recommended amp power to drive speaker)

Sensitivity:

90 dB (avarage SPL 2.83V/ 1mtr on axis 200-10Khz)

System princip:

Sealed enclosure

Connection:

Terminal gold plating (screws/gloves/rubber feets)

Dimensions

Dimensions HxWxD:

16.1 x 7 x 8.8” / 40.8 x 17.8 x 22.3 cm

Weight:

15,25 lbs / 6,9 kg

Colors

Finish:

Black Vinyl